GRAUPNER 6444 Allgemeine Einführung Seite 94

7. DATA VIEW SCREEN
7-1. DATA VIEW <1/4>
- This is to display charge status.
7-2. CYCLE DATA <2/4>
- This is to store cycle operation and various status.
- Total 11 memories ( Memory 0~10)
- Memory consists of "ROM", even if power is OFF, the data still leaves.
- Memory "0" is the latest data, and memory 10 is the oldest data.
Data which happens after 10 times should be removed in order.
- Memory storage
INPUT 0.000V
OUTPUT 0.000V
TEMPERATURE 0.0`F
HIGH TEMP 0.0`F
RESISTANCE 0m
CHG TIME 0:00:00
DSCH TIME 0:00:00
CYCLE DATA 0<2/4>
END.00/00/00 10:00
CHG CAP 0mAh
PEAK VOLTS 0.000V
CHG RESITANCE 0m
DSCH CAP 0mAh
AVG DSCH 0.000V
DISCHG RES. 0m
- CHARGE, DISCHARGE MODE
Data is stored to "0" memory
- CYCLE MODE
If D:C->D mode is activated for 10 times, the first discharge is
stored to "10" memory and 1~10 cycles are stored to 9~0
memories.
If C D, D C mode is activated for 10 times, 1~10 cycles are
stored to 9~0 memories.
The latest data should be stored in Memory "0".
- STEP CHARGE
Initial discharge
st th
1 ~ 4 STEP
- REPEAK CHARGE
Since this mode is to recharge charged battery, the previous
charged data is already stored to "0" memory.
Page
-Input Voltage
-Output Voltage
-Temp of the temp sensor
-Max temp of the temp sensor
-Battery
operation
-Charge time after charging
-Discharge time after discharging
- Cycle number
- Date and Time for the cycle
- Charged capacity
- Peak voltage during charging
- Battery internal resistance at charge
- Discharged capacity
- Average voltage during discharging
- Battery internal resistance at
discharge
"1" memory storage
"0" memory storage
30/53
internal resistance after