Herunterladen Inhalt Inhalt Diese Seite drucken

Transporting Lithium Batteries; Know Your Product; Safety Devices; Symbols On The Product - Ryobi RY18PW22A-125 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
Warning! Store the product indoors only.
Storing in an area with temperature below 0°
will damage the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further advice.
MAINTENANCE
Use only original manufacturer's replacement
parts, accessories, and attachments. Failure to
do so can cause possible injury, can contribute to
poor performance, and may void your warranty.
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed
service technician. Have the product serviced
by an authorised service centre only. When
servicing, use only original replacement parts.
Stop the product, remove the battery
pack, and allow the product to cool down.
Disconnect the product from the water supply:
Before cleaning the product
Before maintaining the product
Before replacing spare parts
You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
Regularly inspect and maintain the product
for safe operation. Ensure that the battery
compartment is properly assembled, tightly
closed, and frequently check for damages.
Any part that is damaged should be properly
repaired or replaced by an authorised
service centre.
If the product is to be stored unused for a
long period, the batteries should be removed.

KNOW YOUR PRODUCT

See page 107.
1.
Release button
2.
Power washer housing
3.
Lock-out button
4.
Latch
5.
Handle grip
6.
Switch trigger
7.
Battery compartment
8.
Water inlet
9.
Extension wand
10. Operator's manual
11. 3-In-1 nozzle
12. Release button
13. Quick connector
14. Siphon hose
15. Floater
16. Filter
17. Battery pack (sold separately)
18. Charger (sold separately)
19. Detergent
20. Multipurpose brush
21. Detergent bottle

SAFETY DEVICES

Lock-out button
The lock-out button locks the switch
trigger
and
prevents
opening of the high-pressure jet.

SYMBOLS ON THE PRODUCT

Warning
To reduce the risk of injury,
read and understand the
operator's manual before
using the product.
Wear eye and hearing
protection.
To reduce the risk of injury
from high-pressure injection,
do not direct spray at persons
or animals.
Kickback. To reduce the risk of
injury from kickback, hold the
trigger handle securely with
both hands when the product
is on.
The product is not suitable
for connection to the drinking
water supply without backfl ow
preventer.
Never point the spray wand to
human, animals, the body of
the product, power supply, or
any electrical appliances.
unintentional
5
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ry18pw22aRy18pw22a-0

Inhaltsverzeichnis