Functional Descriptions; Program Start And Spot Selection; New Spot Selection - Bosch Rexroth PRC 7 00 L/W 1300 Serie Typspezifische Anleitung

54/58 Bosch Rexroth AG
No. PRC7000 outputs
79
Actual gun position (x0,1mm) Bit
15 (sign)
80..87
Electrode tip wear (x0,1mm) Bit
00..07
88..95
Beam uparching (x0,1mm) Bit 00
..07
96..110
Geometry wear (x0,1mm) Bit
00..14
111
Geometry wear (x0,1mm) Bit 15
(sign)
112..126
Sheet thickness Bit 00..14
127
Sheet thickness Bit 15 (sign)
128..142
Weld time default Bit 00..14 (in 1
ms steps)
143
Weld time default Bit 15 "32768"
(sign)
144..159
Status code bit 00..15
160..175
Reserved for additional status
code
Description
 Sign bit for "Actual gun position"
1: negative opening width
Electrode tip wear of the stationary arm of the currently docked gun
(resolution: 0.1mm; proportion adjustable via parameter "Dress
length on fixed electrode arm")
Expected gun deflection during next welding cycle
(resolution: 0.1mm)
Geometry wear of the stationary arm of the currently docked gun.
(resolution: 0.1mm; share of total geometry wear: 50%)
Sign bit for "geometry wear"
1: negative geometry wear
Output of the parameterized sheet thickness for the currently
selected Weldjob.
Resolution: 0.01mm
Sign bit for "sheet thickness"
1: negative sheet thickness
Welding time parameterized in the selected welding job.
Sign of the welding time parameterized in the selected welding
job.
Output of the current PRC7000 error code.
If the error code is > 65535, 65535 is output
8

Functional descriptions

Movements of the gun actuators and tip dresser!
Bruises possible!
Therefore, make sure that can be damaged by movements of the gun

actuators and tip dresser no one.
8.1

Program start and spot selection

The program start is divided into two parts:
 New spot selection
 Program start
Both parts work with a handshake.
R911407348 | PRC 7x00-Lx/Wx-1300
CAUTION