Applying The Camera - XciteRC Rocket260 Bedienungsanleitung

EN
Coming Home
The Coming Home function brings the quadrocopter back to the transmitter automatically. For this, the swit-
ched on model must be placed in front of the pilot with the nose facing away on a level surface. Now move
both sticks to the bottom right corner to calibrate the model (1).
During the fl ight Coming Home is activated by pressing the left AUX1 button (2). Press and hold the button,
the model is now fl ying in the direction of the transmitter. Is it arrived at the transmitter, release AUX1 button
and land the model.
WARNING: never activate Coming Home when the quadrocopter is not in front of you! When the model
is sideways or behind you, the orientation does not work properly and the model can fl y away in the wrong
direction, release the Coming Home button immediately and fl y manually. Also note that the model will fl y
back in the current altitude. I there are any obstacles between you and the model, you must go to a higher
altitude or do not activate the Coming Home function - crash hazard!

Applying the camera

Make sure that the SD card is inserted in the camera. Otherwise the the camera is deactivated. Each tome
pressing the Photo button makes a photo frame, accompanied by a short beep. Press the Video button, the
video recording starts, also the camera icon appears in the display, accompanied by a Di-Di sound and the
camera symbol in the display. Press the Video button again to stop the recording.
The recorded photos or videos can be viewed with the included USB card reader on each PC.
22
Press
1
Photo button
2
1
LCD Display
L. H
Video button
ON: Video recording
OFF: Video recording stopped
Coming Home · Camera
2
%
EASY
XciteRC Rocket 260 3D