Trim; Speed And 360 Degree Flips; Headless Mode - XciteRC Rocket260 Bedienungsanleitung

Trim · Speed and rolls · Headless Mode

Trim

Yaw trim
(or left / right
trim)
Speed and 360 degree fl ips
Speed: press the AUX1 button on the left side of the transmitter (1) during the fl ight and the Quadrocopter
becomes faster. The display switches fron EASY to PRO (2). Press the AUX1 button again to return to slower
speed.
AUX2 Button AUX1 Button
360 degree fl ips and rolls
Once you are familiar with the aforementioned maneuvers, you can venture to fl ips and rolls. Fly at least 1.5 m
high, and then activate the PRO mode (see above). Then press the AUX2 button (3). A sound and 3D in the
screen (4) indicates that the mode is active. Now move the right control lever to the desired direction (5) and
the model rolls once around its own axis. Hold the lever down in the end stop to fl y multiple fl ips.
NOTE: for better 3D performance, we recommend that you remove the rotor guards.
AUX2

Headless mode

The Headless mode is ideal for beginners to fl y the model safely. In headless mode, the Quadrocopter always
fl ys from the pilot's view. No matter how the model is in the air, the front is always away from the pilot, left and
right does not swap when the model is fl ying towards the pilot.
The Headless mode is activated by pressing the control lever, a beep indicates the function. As long as this
beep appears, the Headless mode is active. Press the control lever again to deactivate the headless mode.
XciteRC Rocket 260 3D
Forward/
Backward
trim
Left / Right
trim
(or yaw trim)
AUX1
3 LCD Display
L . H
L . H
%
E A S Y
1
4
3 D
%
P R O
2
LCD Display
L . H
%
P R O
5
21