Coming Home; Applying The Camera (Optional); Illumination - XciteRC Rocket 250 3D Bedienungsanleitung

Coming Home

The Coming Home function brings the quadrocopter back to the transmitter automatically. For this, the swit-
ched on model must be placed in front of the pilot with the nose facing away on a level surface. Now move
EN
both sticks to the bottom right corner to calibrate the model (1).
During the flight Coming Home is activated by pressing the left AUX1 button (2). Press and hold the button,
the model is now flying in the direction of the transmitter. Is it arrived at the transmitter, release AUX1 button
and land the model.
WARNING: never activate Coming Home when the quadrocopter is not in front of you! When the model
is sideways or behind you, the orientation does not work properly and the model can fly away in the wrong
direction - crash hazard!

Applying the camera (optional)

Make sure that the SD card is inserted in the camera. Otherwise the the camera is deactivated. Each tome
pressing the Photo button makes a photo frame, accompanied by a short beep. Press the Video button, the
video recording starts, also the camera icon appears in the display, accompanied by a Di-Di sound. Press
the Video button again to stop the recording.

Illumination

Press the control lever to switch the lighting of the Rocket 250 3D on or off. Is the lighting on, a bulb appears
in the transmitter sreen.
22
1
1
Video button
Photo button
1
Coming Home · Applying the camera · Illumination
2
LCD Display
L . H
%
E A S Y
ON: Video recording
OFF: Video recording stopped
2
LCD Display
L . H
%
E A S Y
2
XciteRC Rocket 250 3D