Electrolux DMSL8340AO Benutzerinformation Seite 9

4. Attach the stripes to the rabbets. Do
not stretch the stripes. Do not bond
the ends of the stripes one over the
other.
After you assemble the hob, seal the
remaining gap between the glass
ceramic and the worktop with silicone.
Make sure the silicone does not get
under the glass ceramic.
3.5 Assembly
Refer to the installation booklet for
detailed information on how to assemble
your hob.
Follow the hob connection diagram and
the window switch connection diagram (if
applicable) presented in the installation
booklet and / or the labels under the hob.
Only for selected
countries
In case of exhaust
installation a window switch
might be required (consult
an authorised technician).
You need to buy it
separately as it is not
supplied with the hob. The
window switch has to be
installed by an authorised
technician. Refer to the
installation booklet.
min.
500mm
If the appliance is installed above a
drawer, the hob ventilation can warm up
the items stored in the drawer during the
cooking process.
ON-TOP INSTALLATION
INTEGRATED INSTALLATION
min.
50mm
ENGLISH 9