Setting The Heating Break; Setting Frost Protection Mode; Window Open" Function - eQ-3 CC-RT-B-CyK-W Bedienungsanleitung

• Once the function is active, "LOC" will appear on the display.
To deactivate the function, press both buttons again.
•
If the heating is being switched off for the summer, you can
save battery power. This involves opening the valve up fully.
Limescale protection measures remain in place.
To activate the heating break, turn the setting wheel
•
clockwise during manual operation (Manu) until "ON"
appears on the display.
To terminate the heating break, quit manual operation
•
(Manu) or turn the setting wheel anticlockwise.

11. Setting frost protection mode

If you do not want the room to be heated, the valve can
be closed. It will only be opened again if there is a risk of
freezing due to frost. Limescale protection measures re-
main in place.
• To activate frost protection mode, turn the setting wheel
anticlockwise during manual operation (Manu) until
"OFF" appears on the display.
To terminate frost protection mode, quit manual opera-
•
tion (Manu) or turn the setting wheel clockwise.
In the event of a significant drop in temperature, the actu-
ator can automatically detect whether the room is being
ventilated. To save on heating costs, the temperature is
then automatically reduced for a specific time period (fac-
tory setting: 15 minutes). While this function is active, the
"window open" symbol (
• Press and hold down the menu button for more than
3 seconds.

10. Setting the heating break

12. "Window open" function

) appears on the display.
29