Disposal; Troubleshooting - VOLTCRAFT VC5070 Bedienungsanleitung

Disposal

Old electronic devices are resources and do not belong in the household waste. At the end of
its service life, dispose of the product at the collection point of your community according to
the relevant statutory regulations. It is prohibited to dispose of the device in the household
waste.

Troubleshooting

By purchasing the multimeter you have acquired a state-of-the-art product which
operates reliably.
Nevertheless, problems or malfunctions may occur.
For this reason, the following is a description of how you can eliminate possible mal-
functions yourself:
Please observe the safety instructions!
Error
The multimeter does not work.
No measurements possible
via V/mA socket (7).
No change in measured values.
Faulty measuring results are
displayed.
Any repair work other than that described above must be carried out by an approved spe-
cialist.
If you have questions concerning the use of the measuring device, our technical support
service is available at the following telephone number:
Voltcraft®, 92242 Hirschau, Lindenweg 15, Tel. no. 0180 / 586 582 7.
Possible cause
Are the batteries exhausted?
Is the power indicator lit? Check the state of the batteries and,
if necessary, the fuse.
Is the fuse defective?
Check the fuse (fuse replacement)
Have you selected the right measuring sockets?
Is the measuring mode correct (AC/DC)?
Has null balancing of the display or a 0 Ohm calibration
for the resistance measurement been carried out?
Is the "Vrms/Vp-p" button (8) pressed in?
37