Basic Safety Notes - Geberit ESG LIGHT Betriebsanleitung

EN

Basic safety notes

Intended use
The Geberit ESG Light electrofusion tool may only be used for
welding:
• Geberit electrofusion couplings ø 40–160 mm with Geberit PE and
Geberit Silent‑db20 pipes and fittings
• Geberit electrofusion tapes for anchor point ø 50–315 mm with
Geberit PE pipes and fittings
The Geberit ESG Light electrofusion tool is exclusively intended to be
used in accordance with these operating instructions. Other uses are
deemed to be improper and can lead to serious injury or death.
The Geberit ESG Light electrofusion tool may only be connected to a
public power supply system with the approval of the power supplier.
User qualifications
Without suitable training, users cannot detect or may incorrectly
estimate the hazards presented by Geberit electrofusion tools. They
are therefore at risk of seriously injuring themselves or others.
• Only skilled persons qualified in pipe installations are permitted to
use Geberit electrofusion tools.
• Users must be conversant with – and adhere to – country-specific
safety regulations.
• Users working with a Geberit electrofusion tool for the first time
must have been instructed by an expert or have attended a
specialist course on how to handle it safely.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
16
63050397048849803 © 02-2023
967.778.00.0(02)