Appendix; Faqs (Frequently Asked Questions) - Bluetti AC200MAX Benutzerhandbuch

6. Appendix

6.1 FAQs (Frequently Asked Questions)

Q: How do I know whether my devices will work well with this product?
A: Please evaluate the total constant load of your appliances. If it doesn't exceed the
Max. output power of AC200MAX, you can use this power station.
Q: Can I use third-party solar panels to charge this product?
A: Yes, you can. Please make sure your solar panels have an open circuit voltage of
10V-145V and MC4 connectors. Do not mix different types of solar panels.
Q: What does the Depth of Discharge (DoD) refer to?
A: DoD indicates the fraction of power that can be withdrawn from the battery. The
BLUETTI AC200MAX sets the DoD to 90%, which means that 90% of the capacity is
available to power your device, while the reserved is used to protect the battery from
over-discharging.
Q: Can it charge and discharge at the same time?
A: Yes, but it has no UPS feature.
Q: How to disable the touch screen sound?
A: Sorry, it cannot be turned off.
Q: Can it run my refrigerator, window air conditioner or power drill?
A: Yes, but they typically require a startup power which is 5-7 times than the rated
power, easily overloading AC200MAX.
Q: Can two AC200MAX be paired for higher output voltage, power and capacity?
A: No.
Q: Can the AC200MAX be connected to the home circuit breaker box?
A: No.
Q: Why does the screen display 0 watt output when I plug in a small load, like a
35W LED lamp?
A: The current is too small to be measured accurately when connected to low loads.
Q: Why only one fan is running ?
A: There are intelligent control program in the unit ,when total output power is
between 1000W-1500W, only one fun is running , when it exceeds 1500W , both fans
are running.
21
JUST POWER ON