Herunterladen Inhalt Inhalt Diese Seite drucken

Appendix; Faqs - Bluetti AC180 Benutzerhandbuch

Tragbare powerstation
Vorschau ausblenden Andere Handbücher für AC180:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Appendix

5.1 FAQs

Q1:
How do I know whether my devices will work well with this product?
A:
Please evaluate the total constant load of your devices. If it doesn't exceed the Max.
output power of AC180 (1800W), you can use this power station to run your devices.
Note: Some devices with built-in motor/compressor may start at 2-4 times the rated
power, which can easily overload the AC180.
Q2:
Can I use third-party solar panels to charge this product?
A:
Yes, you can. Make sure your solar panels have an open circuit voltage of 12V-60V
and have the MC4 connectors. Please do NOT mix different types of solar panels.
Note: Time required for one full charge depends on weather condition, the sunshine
intensity and the angle of solar panels.
Q3:
Can it charge and discharge at the same time?
A:
A: Yes. It supports pass-through charging. AC180 comes with the premium LiFePO4
battery and proprietary Battery Management System to ensure that it can charge
and discharge at the same time.
Q4:
What is ECO mode and can I turn it off?
A:
ECO mode helps save power, and you can turn it on or off on the screen. When
operating on ECO mode, the AC/DC output will automatically turn off if the AC180 is
bearing low or no load for a while. You can set the power threshold of AC output and
DC output to 15-30W /5-10W, respectively, for 1, 2, 3, or 4 hours.
Q5:
Why is the charging power often too low?
A:
AC180 has a built-in intelligent BMS that automatically adjusts the charging power
in response to the battery temperature and SoC, thus protecting the battery and
extending its service life.
Q6:
Can I make the AC180 less noisy when charging?
A:
Yes. Select "Silent" for AC charging in the BLUETTI app. Please refer to 4.3.1 AC
Charging for more details.
Q7:
When should I use the Grid Enhancement mode?
A:
This mode is handy when charging the AC180 via an unstable AC source, such as an
unreliable grid or generator.
E.g. If you change the generator's output while charging the AC180, the voltage dip
will also cause the charge to fail.
18
JUST POWER ON

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis