Service; Specific Safety Information; Safety Instructions For Transportable Threading Machines; Description, Specifications And Standard Equipment Description - RIDGID 300 Compact Bedienungsanleitung

300 Compact/1233 Threading Machines

Service

• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

Specific Safety Information

WARNING
This section contains important safety information
that is specific to these tools.
Read these precautions carefully before using the
300 Compact/1233 Threading Machines to reduce
the risk of electrical shock or other serious injury.
SAVE THESE INSTRUCTIONS!
Keep this manual with machine for use by the operator.
Safety Instructions for Transportable
Threading Machines
• Keep floor dry and free of slippery materials such
as oil.­Slippery­floors­invite­accidents.
• Restrict access or barricade the area when work
piece extends beyond machine to provide a mini-
mum of one meter clearance from the work piece.
Restricting access or barricading the work area around
the work piece will reduce the risk of entanglement.
• Do not wear gloves. Gloves may be entangled by
the rotating pipe or machine parts leading to personal
injury.
• Do not use for other purposes such as drilling
holes or turning winches. Other uses or modifying
this machine for other applications may increase the
risk of serious injury.
• Secure machine to bench or stand. Support long
heavy pipe with pipe supports. This practice will
prevent tipping.
• While operating the machine, stand on the side
where the operator controls are located. Operating
the machine from this side eliminates need to reach
over the machine.
• Keep hands away from rotating pipe and fittings.
Stop the machine before wiping pipe threads or
screwing on fittings. Allow the machine to come
to a complete stop before touching the pipe. This
practice will reduce the chance of entanglement in
rotating parts.
• Do not use this machine to install or remove
(make or break) fittings, it is not an intended use
4
of the machine. This practice could lead to trapping,
entanglement and loss of control.
• Keep covers in place. Do not operate the machine
with covers removed. Exposing moving parts in-
creases the probability of entanglement.
• Do not use this machine if the foot switch is
broken or missing. The foot switch provides safe
control of the machine, such as shut-off in case of
entanglement.
• One person must control the work process, ma-
chine operation and foot switch. Only the operator
should be in the work area when the machine is
running. This helps reduce the risk of injury.
• Never reach into the machine front chuck or
rear centering head. This will reduce the risk of
entanglement.
• Read and understand these instructions and the
instructions and warnings for all equipment and
materials being used before operating this tool to
reduce the risk of serious personal injury.
If you have any question concerning this RIDGID
– Contact your local RIDGID
– Visit RIDGID.com to find your local RIDGID contact
point.
– Contact Ridge Tool Technical Service Department at
ProToolsTechService@Emerson.com, or in the U.S.
and Cana da call 844-789-8665.
Description, Specifications And
Standard Equipment
Description
The RIDGID Model 300 Compact and 1233 Threading
®
Machines are electric motor-driven machines that center
and chuck pipe, conduit and bolt stock and rotates it
while cutting, reaming and threading operations are per-
formed. Threading dies are mounted in a variety of avail-
able die heads. An integral oiling system with adjustable
flow rate is provided to flood the work with thread cutting
oil during the threading operation.
With proper optional equipment, RIDGID
Compact and 1233 Threading Machines can be used
to thread 2 / " – 4" pipe, short or close nipples or for roll
1
2
grooving.
product:
®
distributor.
®
Model 300
®
999-998-098.08_REV C