Husqvarna DC 655 Bedienungsanweisung Seite 13

1. Move the dust outlet handle to the closed position
(A).
2. Remove the funnel of the BigBag from the dust
outlet and close it.
3. Pull the BigBag off the support plate.
4. Obey local regulations for disposal of the full BigBag
bag.
5. Install the funnel of the BigBag (E) on the dust outlet
(C).
C
D
E
6. Attach the funnel of the BigBag on the dust outlet
with straps (D).
2061 - 002 - 19.04.2023
7. Make sure that the BigBag sits evenly on the support
plate.
A
B
8. Move the dust outlet handle to the open position (B).
To install a new Longopac dust bag
WARNING:
filters before you replace the Longopac dust
bag.
A
B
Always clean the primary
13