Wilo Yonos PICO OEM Einbau- Und Betriebsanleitung Seite 37

Constant speed
H- H+
Completing the
setting
Shutting down the
pump
Cleaning
Installation and operating instructions Wilo-Yonos PICO OEM
Constant speed I II III:
• Select the setting range of the constant speed.
• Select speed stage I II or III.

The LED display shows the set speed c1, c2 or c3
according to the characteristic curve.
• Do not rotate the operating button for 2 seconds.
• LED display flashes 5 times and changes to the cur-
rent power consumption in W.
NOTE
All settings and displays are retained if the power
supply is interrupted.
8 Decommissioning
Shut down the pump immediately in case of damage to
the connecting cable or other electrical components.
• Disconnect the pump from the power supply.
• Contact Wilo customer service or a specialist technician.
9 Maintenance
• Carefully remove soiling from the pump on a regular
basis using a dry duster.
• Never use liquids or aggressive cleaning agents.
37