Warnings In This Document; Proper Use - Trumpf TruTool C 160 Bedienungsanleitung

1.3 Symbols
The following symbols are important for
reading and understanding the operator's
manual. The correct interpretation of the
symbols helps to operate the power tool
properly and safely.
Sym-
Description
bols
Type of slitting shears, e.g. Tru-
C 160
Tool C 160 (2A5)
(2A5)
Power tool with rechargeable bat-
tery
Power tool with power cable
Power tool with speed controller
Power tool with chip clipper
Lubrication
Inspection
Loosening/tightening Torx-head
screw
Check charge of rechargeable bat-
tery
Read operator's manual
Disposal/recycling of old devices
and batteries
Li-ion

1.4 Warnings in this document

Warnings warn about dangers that can occur
when handling the power tool. They come in
four danger levels that can be distinguished
by the signal word:
Signal
word
DANGER
WARNING
CAUTON
ATTEN-
TION

1.5 Proper use

TRUMPF slitting shears are hand-guided
power tools for the following applications:
– Slitting plate-shaped workpieces made
of steel, aluminum, plastic, etc.
– Slitting straight or curved outer edges
and making interior cut-outs
– Slitting after marking
C 160
(2B5)
shears also offer the opportunity to cut off
the chip that arises within the workpiece dur-
ing processing.
Translation of the original
operator's manual
Meaning
Indicates a danger with high
risk, which can cause death or
severe injuries if it is not
avoided.
Indicates a danger with
medium risk, which can cause
severe injuries if it is not
avoided.
Indicates a danger with low
risk, which can cause minor or
moderate injuries if it is not
avoided.
Indicates a danger that can
cause property damage.
C 250 C 250
(3B5) (2B1)
These TRUMPF slitting
EN
11