Safety - Trumpf TruTool C 160 Bedienungsanleitung

EN
Contents
1 Safety................................................. 10
2 Product description ............................ 12
3 Operation ........................................... 14
4 Consumables and accessories.......... 14
5 Troubleshooting ................................. 15
6 Declaration of conformity ................... 16
7 Disposal of old power tools and elec-
tronic devices..................................... 16

1 Safety

1.1 General safety instructions
- Read all safety warnings, instructions, il-
lustrations and specifications provided
with this power tool.
Failure to follow all instructions listed be-
low may result in electric shock, fire and/
or serious injury.
- Save all warnings and instructions for fu-
ture reference.
10
1.2 Additional safety instructions
Electrical voltage
Danger to life due to electric shock
Before each use, check the plug, ca-
u
ble, and power tool for damage.
Danger of hand injuries due to
sharp blades or edges
Do not reach your hand into the pro-
u
cessing section.
Wear protective gloves.
u
Danger of injury or property dam-
age due to use of third-party acces-
sories
Only use original TRUMPF acces-
u
sories.
Property damage due to excessive
power supply voltage
u Make sure that the power supply volt-
age matches the details on the power
tool's nameplate.
Translation of the original
operator's manual
DANGER
WARNING
WARNING
ATTENTION