ISC RAD Bedienungsanleitung Seite 6

EN795:2012-B
Anchor devices. Temporary anchors. For use ONLY with RAD Rope Lanyard 11mm. Max user weight - one
person load.
Temporary anchor point:
• Any structural member must be assessed as being unquestionably reliable. Sharp or abrasive edges
should be checked for and either removed or protected against.
• The fixing screw must remain in place for use in this category, preventing the rope from being removed.
• Pass the end of the lanyard around the anchor, then clip both connectors through the knot of the
working rope, the delta maillon, or the rigging plate. DO NOT use a karabiner for this attachment point.
Fig 11
• Ensure that the handle is facing away from the structure and cannot be inadvertently depressed.
• Tie the device off with a slip knot backed up with an overhand knot around the standing end. Fig 12a
- 12f
Fig 11
Fig 12c
6
Fig 12a
Fig 12d
Fig 12b
Fig 12e
RAD: Issue C - November 2022
Fig 12f