HMS ABS MASTER PRO SUPER Bedienungsanleitung Seite 21

Solutions
Status:
No stimulation
Stimulation is too low
Stimulation is too strong
Sudden obstacle to the
stimulation
Gel sheet is not sticky
Redness and pinching
If, after these solutions have been applied and the problem still exists, contact your product vendor.
Probable cause
Device turned off
Gel sheet does not adhere to
the skin
Gel sheet is damaged
The gel sheet is dirty, dusty
Low intensity level
The power of the device is low
Damaged gel sheet
The gel sheet is dirty
High level setting
Sheet does not adhere to the
skin
Remaining power is exhausted
Gel sheet is dirty
Gel sheet is damaged
The sheet does not adhere to
the skin
Gel sheet is dirty or dry
Gel sheet is damaged
Abisal Sp. z o.o.
ul. Św. Elżbiety 6
Solution
Press mode button "+"
Match the sheet directly to the
skin
Replace the sheet
Replace the sheet
Increase the intensity with the
+ button
Charge the device
Replace the gel sheet
Replace the gel sheet
Reduce training intensity
Make sure the sheet adheres to
the skin
Charge the device
Replace the gel sheet
Replace the gel sheet
Make sure the sheet adheres to
Replace the gel sheet
Replace the gel sheet
41-905 Bytom
www.abisal.pl
the skin