HMS ABS MASTER PRO SUPER Bedienungsanleitung Seite 20

MAINTENANCE
5. To protect from scratches, gently wipe away sweat and moisture with a dry cloth
6. If the device is dirty, soak a soft cloth in a warm water with a neutral detergent. After
wringing it out, gently wipe the dirt from the surface
7. Soak a soft cloth in clean water, then wring and wipe the detergent from the pad
8. After cleaning, dry the device in a natural, shaded well-ventilated place
REPLACEMENT OF THE GEL SHEETS
Please follow the three steps below:
4. Remove the blue film from the gel (the blue side is the front)
5. Place on a silver electrode
6. After carefully placing the sheet on the pad remove the transparent film from the back of the
gel sheet (the transparent film is the back)
Note: Remove the film gently, too much force may damage the gel sheet.
Do not use if the gel sheet is damaged, dirty or its condition has deteriorated.
Abisal Sp. z o.o.
ul. Św. Elżbiety 6
41-905 Bytom
www.abisal.pl