General Power Tool Safety Warnings; Work Area Safety - Parkside PSBM 1100 B1 Originalbetriebsanleitung

Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
Total vibration value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Drilling into metal
(Main handle) a
(Auxiliary handle) a
Impact drilling into concrete
(Main handle) a
(Auxiliary handle) a
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
PSBM 1100 B1
L = 92 dB (A)
pA
K = 5 dB
L = 103 dB (A)
WA
K = 5 dB
= 4,8 m/s 2 , K = 1,5 m/s
h,D
= 3,9 m/s 2 , K = 1,5 m/s
h,D
= 9,3 m/s , K = 1,5 m/s
2
h,ID
= 9,0 m/s 2 , K = 1,5 m/s
h,ID
WARNING!
► Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions, illust-
2
rations and specifications provided with this
2
power tool. Failure to follow all instructions
listed below may result in electric shock, fire
2
and/or serious injury.
2
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
GB │ IE │ 3 ■