Functional Description; Cpk Hybrid Tool; Power Pack With Control Box; Accessories For Automation - HellermannTyton Autotool CPK hybrid Automatisierungsanleitung

3

Functional description

3 .1

CPK hybrid tool

4
3
1 Autotool CPK hybrid
2 Display with touch-sensitive controls
3 Waste box
4 End cap with front sensor, top and bottom jaws
The tool loops the cable ties around the bundle and cuts the
excess length off the ties.
See the Operating Instructions for the tool for a description
of the Autotool CPK hybrid.
3 .2

Power pack with control box

6
5
4
1 Housing
2 Socket for foot-operated switch (required only for Bench mount kit CPK)
3 USB port for connection to PC
4 Socket for power supply
5 3 Phoenix sockets for analogue signal processing busy, error and
external sensor input (e.g. reload cable ties)
6 Socket for serial interface
CPK_hybrid_Automation_instructions_106-29009_V01_01.2023
1
1
The power pack with control box supplies electricity to the
tool. The control box also provides a serial interface and
connections for an external sensor, enabling the tool to be
integrated into automatic systems. The status of the USB
port is shown by an indicator on the front of the power
pack.
See the Operating Instructions for the tool for a description
of the power pack.
Description of the connections: à "Pinout of serial interface,
power pack with control box" on page 15.
3 .3

Accessories for automation

2

3 .3 .1 Robot adapter CPK

The robot adapter CPK is for securing the tool to automated
systems such as robots, à "Installing the robot adapter
CPK" on page 8.

3 .3 .2 Ejector CPK

In an automated system, the ejector CPK pushes the bundle
way from the tool, ensuring that the cable tie clears the
2
tool's head sensor, à "Installing the ejector CPK" on
page 9.
3
Functional description
6