Overview Of Interfaces, Power Pack With Control Box - HellermannTyton Autotool CPK hybrid Automatisierungsanleitung

7 .2 .1 Overview of interfaces, power pack with
control box
A B
1 2 3 1 2 3
12
Last Tie Error
11
max. 250V~
10
A-1 A-2
1 2 3 1 2 3
1 Socket for serial interface (D-SUB plug-in connector)
2 Socket for foot-operated switch (required only for Bench mount kit CPK)
The socket for the foot-operated switch is deactivated when
the interface to the PC is activated.
3 USB (B) port for connection to PC
4 USB port for exporting process data to USB memory stick
5 Socket for connection to tool
6 Main switch
7 LED indicator Power
Green: Power pack with control box switched ON
8 LED indicator Signal
Green: Autotool CPK hybrid connected and ready,
Red: Error
Yellow: Binding cycle active
Blue: Navigation in main menu, binding not possible
9 LED indicator Data
Green: PC connected; Autotool CPK hybrid connected; USB stick found;
USB stick can be removed,
Red/green flashing: Data is being written to USB stick
10 Socket for power supply
11 Sockets for an external sensor
12 Error/Busy: Freely assignable relay outputs
CPK_hybrid_Automation_instructions_106-29009_V01_01.2023
C 1
1 2 3
Busy
External
2-1
BN
NPN
BK
BU
2 3 4 5
A Last Tie: Sensor input signal, e.g. or monitoring the end of the
cable-tie strip in automated processes, to indicate that the
stock of material is low
B Error: Error output signal, indicates a fault
C Busy: Busy output signal, indicates for example the setting of
each cable tie during automated operation
24 V relay 1xUM
Rated load: 0.5 A / 125 V AC and 1 A / 24 V DC
1: Normally closed
2: Normally open
3: Flip-flop
A-1 Connector assignment with switch
1: +25.2 V DC
2: S
3: 0V DC
A-2 Connector assignment with inductive proximity switch
1: +25.2 V DC
2: S
3: 0V DC
2-1 External start signal, e.g. foot-operated switch
Technical data
Data Signal Power
9 8 7
6
14