Checking/Replacing The Dust Collection Container - Kemper SparkTrap Betriebsanleitung

NOTE
Do not clean the product with compressed air. This may result in dust
particles getting into the ambient air.
Always ensure there is adequate lighting and ventilation for maintenance
tasks.

7.2.1 Checking/replacing the dust collection container

The fill level of the dust collection bucket must be checked at regular
intervals.
The time until dust collection container must be replaced depends on the
type and quantity of the dust particles that occur. The operating company
must check the level at regular intervals to avoid the dust collection
container becoming overfull.
The dust collection container must always be exchanged in good time to
avoid contamination of the surroundings.
Item Description
1 Butterfly valve/shut-off valve
2 Tube section
1502021-01
Fig. 16: Changing the dust collection container
Tab. 18: Changing the dust collection container
Item Description
3 Lid
4 Dust collection container
- 61 -
EN