Assembly; Unpacking And Assembling The Product - Kemper SparkTrap Betriebsanleitung

5 Assembly

Instructions for safe installation of the product
NOTE
The operating company of the product may only assign specialists to
carry out independent assembly.
• At least two people are needed to assemble the product.
• Only use suitable transport and lifting equipment.
• It must be ensured that the assembly location provides sufficient load-
bearing capacity.
• Only use suitable fixing material.
• The fixing material must be selected according to the local conditions.
• The product must not obstruct anyone in their working area.
• Existing air outlet grilles must not be covered.
• Existing maintenance doors and covers must be freely accessible.
DANGER
Falling parts may cause life-threatening injuries!
Tipping or falling loads lead to severe to fatal injuries.
• Never step under suspended loads.
• Always remain outside the danger zone.
• Observe the total weight, attachment points and centre of gravity of
the load.
• Observe the transport instructions and symbols on the transported
goods.
WARNING
Incorrect connections may cause serious injuries!
Please note the necessary safeguards and only have the product
connected by trained specialists.

5.1 Unpacking and assembling the product

NOTE
If add-on products are also present, follow the appropriate manuals when
assembling them.
1502021-01 - 53 -
EN