Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(13)
(14)
(15)
6. Place the grease filter (15) with the pins
into the openings.
7. Push the locks (14) up; snap the grease
filters (15) in and release the locks.
8. Close the cover (13) again and allow it to
click into place.
9. Switch the power back on.
10. Dispose of the used charcoal filters with
household waste.
Care and maintenance
Lighting
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Do not remove the covers of the
lamps.
■ Do not attempt to replace the bulbs.
If one of the LEDs ceases to work, it
must be changed by an authorised
service technician.
Maintenance-free LEDs are used as lights. If
a light does not work, contact our customer
service department (see page EN-22).
Note for the service technician:
This exhaust hood requires LEDs with the
ILCOS D-Code DDS-1.5/65-S-120/33,
12 V DC, 1.5 W.
Page EN-11
Werbung
Inhaltsverzeichnis
