Privileg SY-103E13-E4-C55-L52-600 Gebrauchsanleitung Seite 46

Page EN-18 Assembly
(15)
5. Open the locks (14) on the grease fil-
ters (15) and carefully pull the grease fil-
ters downwards to remove them.
2x
(11)
6. Carefully hang the Exhaust hood on the
two round-head screws (11) using the key-
hole openings.
7. If necessary, remove the Exhaust hood
again to loosen or tighten the screws in
order to ensure that the hood is flush with
the wall.
(14)
8. Turn two round-head screws (12)
into the prepared wall plugs to secu-
re the Exhaust hood, and screw the
Exhaust hood tightly to the wall.
(13)
(11)
(14)
(15)
9. Place the grease filter (15) with the pins
into the openings.
10. Push the locks (14) up; snap the grease
filters (15) in and release the locks.
11. Close the cover (13) again and allow it to
click into place. The Exhaust hood is now
mounted to the wall.
2x
(12)