Husqvarna AUTOMOWER FlexiFence Bedienungsanweisung Seite 12

Solid light - The battery state of charge is more than 30%.
Flashes slowly - The battery state of charge is 10-30%.
Flashes quickly - The battery state of charge is less than 10%.
Light Cause
Flashes The battery is empty or there is
white 5 an error.
times
Blue LED The zone boundary wire is de-
fective or not connected.
Purple The product cannot find the
LED boundary wire for the work
area. The ECO mode is ena-
bled or the zone range is incor-
rect.
Red LED The temperature of the product
is too high.
12
Solution
Push the ON/OFF button for 5
seconds to see the status.
Replace or connect the zone
wire.
Examine the boundary wire
for the work area, replace the
boundary wire if it is defective.
Make sure that the boundary
wire for the work area is instal-
led correctly.
Make sure that the charging
station of the robotic lawn
mower is connected to a power
outlet.
Disable the ECO mode.
Put the product in an area with
protection from the sun. Let
the temperature of the product
decrease before you start the
product.
If the problem remains, speak
to your local Husqvarna repre-
sentative.
1685 - 004 - 26.10.2022