General Information; 1 The Vc 1000; 2 Intended Use - Vieweg VC 1000 Bedienungsanleitung

Operating Instructions VC 1000
VIEWEG

1 General information

Dear customer,
Thank you for choosing our model VC 1000 dispensing valve controller
To ensure proper operation, please carefully read the following pages for correct opera-
EN
ting and maintenance instructions Keep these instructions handy for future reference
If you require further information or if you have any questions please contact us directly
at
Phone: +49 8166 6784 -0
Email: info@dosieren de

1.1 The VC 1000

The VC 1000 series valve controller differ only slightly in their technical version For this
reason, only the model VC 1000 is referred to below
The digital valve control unit of the VC 1000 series is used for the precise control of
pneumatically controlled metering valves, such as the DV-5325 metering valve, which
are operated with control compressed air Depending on the version, the VC 1000 cont-
rols both the compressed air for the cartridge and the control air for the metering valves
used
With the built-in compressed air regulator, the material pressure for the cartridge or the
material container can be set exactly Digital pressure monitoring incl display of the inlet
pressure additionally increases process reliability

1.2 Intended Use

The device is designed and constructed for commercial use It is only to be used for
dispensing liquid and paste materials such as adhesives, lubricants, various pastes, grea-
se, oil, silicone and other similar materials Any other use is considered improper If this
device is used for other purposes, personal injury or damage to property may result
The manufacturer assumes no responsibility for consequences resulting from improper
use of the unit
20