General Information; The Smartbox; Intended Use Of Unit - Vieweg smartBOX eco-PEN300 Bedienungsanleitung

VIEWEG

1 General information

Dear customer,
Thank you for choosing our smartBOX for control of our eco-PEN .
To ensure proper operation, please carefully read the following pages for correct
EN
operating and maintenance instructions . Keep these instructions handy for future reference .
If you require further information or if you have any questions please contact us directly at:
Phone: +49 8166 6784 -0
Email: info@dosieren . d e

1.1 The smartBOX

The digital eco-PEN valve controller series smartBOX can be set-up with different
options specifying various technical differences . Therefore the following manual deals
only with our smartBOX .
The digital dispenser smartBOX is used for precise control of preeflow® eco-PEN
volumetric dispensing valves type: eco-PEN300/330/450/600/700 in combination with
VR/JR3000 and JC-3 (no X2 Type) dispensing robot series .

1.2 Intended Use of Unit

The device is designed and constructed for commercial use only . It is only to be used for
dispensing liquid and paste materials such as adhesives, lubricants, various pastes, grease,
oil, silicone and other similar materials . Any other use is considered improper . If this device
is used for other purposes, personal injury or damage to property may result .
The manufacturer assumes no responsibility for consequences resulting from improper
use of the unit .
Non-intended use, which would also void the warranty, includes:
• Changes to the device not expressly recommended in the operating instructions
• Use of incompatible or damaged spare parts
• Use of non-approved accessories or auxiliary equipment
• Exceeding the approved and recommended pressures
Operating Instructions smartBOX
28