2 Settings; Maintenance And Cleaning - Vieweg VC 1000 Bedienungsanleitung

Operating Instructions VC 1000
VIEWEG

7.2 Settings

By pressing the SELECT button you can step to the next menu option
The asterisk marks your actual position
Language
The system language can be switched between german to english by pressing
EN
UP or DOWN button
Boot Logo
The boot logo can be changed when you type a 4-digit code This should only be done
by the manufacturer
P-Unit
Pressing UP or DOWN key switches between PSI and BAR as unit for the digital displayed
pressure
P-Alarm
By pressing the UP or DOWN key, the value for the low pressure alarm-limit can be
selected If the input pressure is lower than the selected limit, the DC 1200 switches to
ALARM mode and no new dispensing is possible
Service
The service counter shows the total number of dispensings the device has performed It
is NOT resettable

8 Maintenance and Cleaning

8 Maintenance and Cleaning
The dispensing controller is maintenance-free Any needed repairs must be performed
by an authorized repair center or only by sending the unit back to VIEWEG GmbH
To clean the unit and the housing, use only dry or damp cloths and never use cleaning
fluids such as gasoline, thinners or any other flammable or corrosive liquid
29