Getting Started; Inserting The Rechargeable Battery; Recharging The Battery - Renkforce 2633082 Bedienungsanleitung

9 Getting started

9.1 Inserting the rechargeable battery

The unit is powered by a 850 mAh rechargeable Lithium-ion battery.
1. Open the battery compartment on the bottom of the unit by pushing the battery
door following the arrow direction.
2. Insert the rechargeable battery into the compartment. Make sure the battery is
inserted with correct polarity as shown in the compartment.
3. Install the battery door.

9.2 Recharging the battery

The radio can play approx. 10 hours when the battery is fully charged. When the low
battery indicator LED blinks recharge your radio.
Important:
Before operating the radio for the first time, fully charge the battery.
9.2.1 Charging the battery via USB power supply
Charging the battery via a USB power supply is the most efficient charging method
and takes approx. 2 hours.
1. Plug the USB-A end of the USB charging cable into a suitable USB power sup-
ply.
2. Plug the MicroUSB end of the USB charging cable into the MicroUSB socket
on the radio.
The battery power icon will flash.
Æ
The battery power icon will stop flashing if the battery is charged.
Æ
The charging indicator LED will be on during the charging process.
Æ
9.2.2 Charging the battery via dynamo
If you charge the battery for one minute with the dynamo you can operate the radio
for approx. 5-7 minutes.
1. Bring the telescopic antenna into its rest position.
2. Take the dynamo crank from its rest position.
35