Before Use - Taurus Alpatec Catala FACTOR CONNECT Bedienungsanleitung

Downloaded by: pm-capetown on 27-10-2022 08:59 CEST
English
FAN HEATER
FACTOR CONNECT
DESCRIPTION
A Control panel
B Air outlet
C Carry handle
D Display
1 On/Off
2 Funtion and power selector
3 Timer
4 ECO mode
5 Silent mode
6 WIFI configuration
7 Adjustable thermostat / timer button
USE AND CARE:
- Fully extend the appliance's power cable befo-
re each use.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Use the appliance handle/s, to carry it or move
it.
- Do not use the appliance if it is tipped up and
do not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- If you use the appliance in a bathroom or simi-
lar place, unplug the appliance from the mains
when it is not in use, even if it is only for a short
period of time, as proximity to water involves a
risk, even if the appliance is disconnected.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with reduced physical, sensory
or mental abilities or lack of experience and
knowledge.
- Do not store the appliance if it is still hot.
- Do not store the appliance on areas where the
temperature could be lower than 2ºC.
- Make sure that dust, dirt or other foreign ob-
jects do not block the fan grill on the appliance.
- Never leave the appliance unattended while in
use.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance to dry pets or an-
imals.
- Do not use the appliance to dry textiles of any
kind.
- CAUTION: User can't sleep when appliance is
under use; there is a risk of injuries.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all products' packaging has
been removed.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the ap-
pliance is used a light smoke may be detected.
After a short time, this smoke will disappear.
- To eliminate the smell given off by the applian-
ce when used for the first time, it is recommen-
ded to have it on at full power for 2 hours in a
well-ventilated room.
WIFI CONNECTION & DOWNOADING THE
APP:
- To be able to use the fan heater Factor Con-
nect from anywhere, the Taurus App has to be
downoalded.
SET UP:
- Download the Taurus App form the App Store
or Google Play.
- Sign up using your email address and pass-
word.
- Confirm the registration using the verification
code that will be sent to your email account.
- Create your home, name it, establish the geo-
graphical location and select the room where
you are going to place this smart appliance.
- Add Factor Connect by following the steps
described in THE QUICK GUIDE.
LUMINOUS WIFI INDICATOR
- To connect Factor Connect to the Wi-Fi, press
the wifi button (6) until the wifi pilot light flashes
rapidly.
IMPORTANT
- The device only supports 2.4GHz Wi-Fi net-
work.
- If the connection fails again, check the follo-
wing possible causes.