Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Precautions
This product complies with the requirements of the following
European Community Directives: 2004/108/EG (Electromagnetic
Compatibility).
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuit (arcing), the following
safety precautions must be observed.
Damages resulting from failure to observe these safety precautions
are exempt from any legal claims whatever.
* Comply with the warning labels and other info on the equipment.
* Always start with the highest measuring range when measuring
unknown values.
* Do not subject the equipment to direct sunlight or extreme
temperatures.
* Do not subject the equipment to extreme humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* The measurement instrument is not to be to operated unattended.
* Do not operate the equipment near strong magnetic fields
(motors, transformers, etc.)
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilise at room temperature before
taking up measurement (important for exact measurements).
* Do not modify the equipment in any way.
* Do not place the equipment face-down on any table or work
bench to prevent damaging the controls at the front.
* Opening the equipment and service- and repair work must only
be performed by qualified service personnel.
* Measuring instruments don't belong to children hands.
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
mild household cleaner. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.
-11-
Werbung
Inhaltsverzeichnis
