Werbung
Graupner
9407
This model requires a four-function radio control system
Specification
Wingspan approx.
Overall length approx.
Wing section
Tailplane section
Wing area approx.
Tailplane area approx.
Total surface area approx.
All-up weight according to
fittings min. approx.
Longitudinal dihedral
Centre of Gravity, measured
at wing root leading edge
Introduction
The GRAUPNER BELLANCA is an elegant, ultra-lightweight aerobatic trainer
aircraft. At the development stage we placed particular emphasis on low all-up
weight, and this is reflected in the model's performance and handling in the air. The
BELLANCA's flying characteristics make it the ideal model for the pilot taking his first
steps in "full-house" flying, and simple aerobatic manoeuvres are well within the
aircraft's scope. The large wing area and the carefully selected airfoil endow the
model with very docile and neutral flying characteristics. The airframe is built primarily
of balsa wood, with plywood reinforcements at highly stressed points.
The two-part wing makes the model easy to transport; it can even be carried in a
back-pack on a bicycle. The fuselage, wing panels, tailplane and fin are supplied
ready-made and covered in multi-colour film. Little work is required to complete the
model ready to fly: all you have to do is attach the tailplane and fin, install the motor
mount and motor, the undercarriage, the receiving system and linkages.
A four-channel radio control system is sufficient for this model.
Caution: this model is not a toy!
If you are a beginner to this type of powered model, please ask an experienced
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler
INSTRUCTIONS
BELLANCA
For electric power and two LiPo cells
1250 mm
930 mm
Semi-symmetrical
Flat plate
25 dm²
5 dm²
30 dm²
1100 g
approx. 0.5°
approx. 65 mm back
29
Order No.
11/2008
Werbung
