Using On Slopes; Startup - Stiga MP 84 Serie Gebrauchsanweisung

shift to neutral /
release the drive pedal
(
Test driving
6.2.2
A.
B.
Action
1.
2.
operator seated.
the operator leaves his seat
the grass catcher is lifted
or the rear discharge
disengaging the cutting
(for rear collection
models only)
the speed change is
activated or the drive
the reverse gear is engaged
If any of the results fails to match the
use the machine! Contact a service centre to
have it checked and repaired if necessary.
IMPORTANT
the safety devices prevent the engine from
starting if safety requirements have not
been met. In these cases, once the start
consent has been reinstated, the ignition
Of before the engine can be restarted.
Proceed as indicated
in par. 6.2.2
Result
The engine starts
The engine stops
The engine stops
The engine stops
The engine stops
The engine stops

6.3 USING ON SLOPES

particular care. To prevent overturning
•
obstacles (such as stones, branches, roots,
•
•
particular attention to prevent the
• Reduce speed:
before changing direction
and during tight turns
•
•
standstill and unattended.
•
only
• For models with hydrostatic drive
only:

6.4 STARTUP

1.
2. Sit in the operator's position.
3.
4.
5.
6.
7. If cold starting: engage the
EN - 12
20
par. 5.2