Husqvarna 360BT Bedienungsanweisung Seite 6

fitting but not limit your movements. Put your hair
above your shoulders to prevent that your hair
enters rotating parts or catches on branches.
• Use breathing protection when there is a risk of
dust.
• Keep first aid equipment near.
Safety devices on the product
WARNING:
instructions that follow before you use
the product.
• Do not use a product with defective safety
devices.
• Do a check of the safety devices regularly. Refer
Maintenance on page 11 .
to
• If the safety devices are defective, speak to your
Husqvarna servicing dealer.
To do a check of the muffler
WARNING:
with a defective muffler.
WARNING:
very hot during and after operation, also
at idle speed. Use protective gloves to
prevent burn injuries.
WARNING:
muffler contains chemicals that may be
carcinogenic. Do not touch the muffler if
it is damaged.
• Regularly do a visual check of the muffler. The
muffler keeps noise levels to a minimum and
sends exhaust fumes away from the operator.
To do maintenance on the muffler on
Refer to
page 12 .
To do a check of the vibration damping system
1. Make sure that there are no cracks or
deformation on the vibration damping units.
2. Make sure that the vibration damping units are
correctly attached to the engine unit and handle
unit.
Product overview (360BT) on page 2
Refer to
for information about where the vibration damping
system is on your product.
6
Read the warning
Do not use a product
The muffler becomes
The inner side of the
To do a check of the start/stop switch
1. Use the start/stop switch to stop the engine.
2. Make sure that the engine stops fully.
To see where the start/stop switch is on your
Product overview (360BT) on page
product, refer to
2 .
Harness safety
• Make sure that the waist belt is attached and
correctly adjusted. Loose ends of the harness
can enter rotating parts and cause damage to
the fan. If the fan is damaged, loose parts of the
product can eject and cause injury or damage.
Fuel safety
WARNING:
instructions that follow before you use
the product.
• Do not mix or add the fuel indoors or near a heat
source.
• Do not start the product if there is fuel or oil on
the product or on your body.
• Do not start the product if the engine has a fuel
leak. Examine the engine for fuel leaks regularly.
• Always be careful with fuel. Fuel is flammable
and the fuel fumes are explosive and can cause
serious injury or death.
• Do not breathe in the fuel fumes, it can cause
injury. Make sure that there is a sufficient airflow.
• Do not smoke near the fuel or the engine.
• Do not put the product or a fuel container near
warm objects, an open flame, a spark or a pilot
light.
• Always use approved containers for storage and
transportation of fuel.
Safety instructions for maintenance
WARNING:
instructions that follow before you use
the product.
• Stop the engine, remove the spark plug and let
the engine become cool before maintenance and
assembly.
• A blocked spark arrestor screen causes the
engine to become too hot which causes damage
to the engine.
Read the warning
Read the warning
1967 - 002 - 23.02.2023