Husqvarna 360BT Bedienungsanweisung Seite 13

1. Put the foam air filter in a plastic bag.
2. Put the oil in the plastic bag.
3. Rub the plastic bag to supply the oil equally
across the foam air filter.
4. Push the unwanted oil out of the foam air filter
while in the plastic bag.
To clean the air filter (570BTS, 580BTS)
CAUTION:
foam element of the air filter in 570BTS
and 580BTS.
1. Loosen the fasteners that holds the air filter
cover in position.
2. Remove the air filter cover (A).
1967 - 002 - 23.02.2023
Do not put oil on the
A
B
C
3. Remove the foam filter (B) and the paper filter
(C) from the filter frame.
4. Replace the paper filter (C).
5. Clean the foam filter (B) with warm soap water.
6. Make sure that the foam filter (B) is dry.
7. Clean the inner surface of the air filter cover with
a brush (A).
To replace the harness
WARNING:
can make the product fall and cause
injuries. Make sure to install the clamp
correctly.
1. Stop the engine.
2. Remove the clamp from the strap.
3. Push the end of the strap through the eyelet.
4. Pull the new strap through the eyelet.
5. Put the pin into the strap to attach the clamp to
the new strap.
A damaged harness
13