Bergstrom SLIMFIT FORD F-Max H625 1848T sin spoiler Montageanweisungen Seite 17

SLIMFIT
5
Position the fastening mounts with a flat washer,
grower washer and M8/125x50 screw, without
tightening.
6
Screw (2) M6 L=38 hexagons on the rear of the
unit (direction of travel) with rubber washers,
and tighten with a torque of 4.75±10% Nm.
7
Screw (2) M6 L=78 hexagons on the front of the
unit (direction of travel) with rubber washers,
and tighten with a torque of 4.75±10% Nm.
5
6
7
17
EN