Maintenance - ADE PFW2 Serie Betriebsanleitung

Maintenance

Changing the batteries
WARNING!
Risk of explosion or fire!
Incorrect installation of batteries can lead to a short circuit or over-
load, causing a rapid battery temperature rise. Battery overheating
may lead to gas or battery fluid leakage or explosion, which, in turn,
may result in injury.
– Make sure that the polarity is correct when inserting the batteries.
NOTICE!
Risk of damage!
The scale can get damaged due to overload.
– Do not exert too much pressure on the scale.
To change the batteries, refer to the illustrations in the chapter "Inserting the batteries in
the display / control unit".
1. Pull the AC adapter
2. Open the battery compartment. To do this, slide open the battery compartment
cover 14 in the arrow direction.
3. Remove the depleted batteries.
4. Insert new batteries in the battery compartment.
5. Close the battery compartment. To do this, put the battery compartment cover on
the battery compartment and slide shut the battery compartment cover in the arrow
direction until it clicks into place.
Spare parts
Name
AC adapter
Protective cover
Dok./Rev.-Nr. PFW2-221122-Rev001-UM-en
4 out of the socket.
Cleaning and maintenance
Article number
H2884-001
H2884-002
49