Cleaning And Maintenance - ADE M111600 Gebrauchsanweisung

Change unit
Switch the scale on and press the SET key short in order to change the units from kg into lb or oz. The scale
will indicate the chosen units in the display.
Displaying the temperature
Switch the scale on and press the SET key and keep it pressed until the temperature is displayed. Press the
SET key again to return into the weighing mode. The temperature is shown in °C only.
Hold function
The scale is equipment with an automatic hold function. The weight of the baby will automatically be locked
in the display during each single weighing cycle. You can take the baby off the scale and read the weight on
the display for 60 seconds. In order to unlock the weight, press the HOLD key again. The scale will fully
automatically re-weight if the baby is still placed at the scale or will show zero.
Warning signals and advices
If LOBAT is displayed, please replace the batteries. Always use two new batteries.
In case scale will not be used for a long period of time take the batteries out to protect the scale and secure
a long lifetime.
In case the scale does not show `0.00´ after having been started, press TARE to find the zero point.
Safety
Your ADE baby hanging scale is a precision instrument. Handle with care. Do not drop or let heavy
-
object fall onto it.
Never leave the baby unattended hanging in the weighing trouser.
-
Make sure the scale is not getting wet or stored in humid places. Fluids penetrating the scale can
-
severely damage the electronic parts.
Make sure only discharged batteries respective batteries with isolated poles will be disposed as
-
otherwise short circuits may occur. Never dispose batteries in fire, as they may leak or explode
Cleaning
For cleaning just use a damp cloth or common disinfection products. Do not use any aggressive cleaning
fluids. Make sure no water or cleaning fluid penetrates the scale.
Disposal
Electronic devices are no domestic waste.
If the scale is out of use the responsible waste disposal association will be glad to advise
you on the measures necessary to dispose of it properly.
In case of faulty results
Make sure batteries are inserted correctly.
-
Make sure you are in the weighing mode you selected (kg / lb / oz).
-
Do not load the scale before the display shows `0.00´.
-
M111600-201007-Rev005-UM-de-e

Cleaning and maintenance

6