Service; Appliance-Specific Safety Instructions For Hedge Trimmers - Parkside PHSL 900 B4 Originalbetriebsanleitung

g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations.

5. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
Appliance-specific safety instructions
for hedge trimmers
■ Keep your hands away from the cutting
blades. Do not attempt to clear clippings or
hold onto the material being cut while the
blades are still in motion. The blades keep
moving after the switch has been moved to
the Off position. A moment of inattention
while operating the hedge trimmer may result
in serious personal injury.
■ Carry the hedge trimmer by the handle with
the blade at a standstill and be careful not
to activate the switch. Carrying the hedge
trimmer correctly will reduce the risk of acci-
dental activation and any resulting injury from
the blade.
■ Hold the hedge trimmer only by the insulated
grips as the blade could come into contact
with hidden power lines or its own power
cable. Contact between the blade and a live
wire may make exposed metal parts of the
power tool live and could give the operator an
electric shock.
■ Keep all mains cables away from the cutting
area. Cables can be hidden in hedges and
bushes and be cut accidentally by the blade.
■ 38 │ GB │ MT
■ When transporting or storing the hedge trimmer,
always pull the protective cover over the blades.
Proper handling of the hedge trimmer will
reduce the risk of injury from the blade.
■ Make sure that all switches are turned off and
the tool is unplugged when removing trapped
clippings or servicing the machine. Unexpected
activation of the hedge trimmer while removing
trapped material can cause serious injury.
■ Do not use the hedge trimmer in bad weather,
especially if there is a risk of a thunderstorm.
This reduces the risk of being struck by lightning.
■ Reduce the risk of a fatal electric shock by never
using the extended hedge trimmer near elec-
trical wires. Contact with, or use near, power
lines can cause serious injuries and/or a fatal
electric shock.
■ Always operate the extended hedge trimmer
with both hands. Hold the extended hedge
trimmer with both hands to prevent any loss of
control.
■ Wear a hard hat when working overhead with
the extended hedge trimmer. Falling branches
can result in serious injury.
■ Inspect the surface to be cut carefully and
remove any wires or other obstructions.
■ We recommend using a residual current circuit
breaker with a tripping current of 30 mA or less.
NOTE
► The hedge trimmer is supplied completely
assembled.
► Graphical representations illustrating the
usage of the hedge trimmer and its control
elements can be found on the fold-out page.
► Notes and diagrams of the settings, mainte-
nance and lubrication by the user can be
found in these instructions.
► Notes on the working position (see fold-out
page).
► Notes on the control elements (see fold-out
page).
► Notes on exchange and repair (see section
Maintenance and cleaning/service).
PHSL 900 B4