After the selected countdown time (cooking time) has elapsed, the relevant
cooking zone is switched off automatically (s. fig. below).
4.8 Residual heat warning
❖ If the appliance has been operated for a while, the cooking zones will emit
residual heat even after operation. In such a case the letter « H » is indicated.
WARNING! While the appliance is disconnected from the mains the
residual heat indicator does not work, so the cooking zones may be still
hot. Be very careful!
4.9 Overtemperature protection
❖ A temperature sensor monitors the temperatures inside the appliance.
The appliance will stop operating automatically when an overtemperature is
detected.
4.10 Detection of small objects
❖ When a small-sized or unsuitable cookware (e.g., aluminium) or small objects like
knives, forks etc. are placed on a coking zone, the appliance will turn into standby
mode automatically after 1 minute.
❖ The fan will keep cooling down the appliance for another minute.
C
OOKING ZONE
(
5):
POWER LEVEL
➢ Set to 6 minutes.
C
OOKING ZONE
(
6):
POWER LEVEL
➢ Set to 3 minutes.
~
84
1
2
~