SPL Transient Designer 4Mk2 Bedienungsanleitung Seite 9

On
The On switch activates the respective Transient Designer channel. This
allows you to quickly switch between processed and unprocessed signal.
To minimize switching noises, switching is performed directly after the
balanced inputs and outputs. This relay hard bypass circuitry also provides
immediate redirection of inputs to outputs in the event of a power fault on
the primary or secondary side of the power supply, or if the device is powered
off.
LED
The Sig LED (Sig) indicates whether an audio signal is
present at the input which has a level higher
than -20 dB.
Transient Designer 4 Mk2
EN
DE
5