Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance
Remove the electric-start button and battery pack from the machine before maintaining or cleaning the machine.
Use only the manufacturer's recommended replacement parts and accessories.
Inspect and maintain the machine regularly. Have the machine repaired only by an Authorized Service Dealer.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After each use
Yearly
Replacing the Blade
Service Interval: Yearly
Important:
You will need a torque wrench to
install the blade properly. If you do not have a
torque wrench or are uncomfortable performing
this procedure, contact an Authorized Service
Dealer.
If the blade is damaged or cracked, replace it
immediately. If the blade edge is dull or nicked, have
it sharpened and balanced, or replace it.
WARNING
When servicing the blade, the blade can still
move even though the power source is off.
The blade is sharp; contacting the blade can
result in serious personal injury.
• Keep your hands and feet away from a
moving blade.
• Wear gloves when servicing the blade.
1.
Remove the electric-start button and battery
pack from the machine.
2.
Use a block of wood to hold the blade steady
(Figure
24).
3.
Remove the blade, saving all mounting hardware
(Figure
24).
Maintenance Procedure
• Clean grass clippings and dirt from under the machine.
• Replace the blades or have them sharpened (more frequently if the edge dulls
quickly).
4.
Install the new blade and all mounting hardware
(Figure
25).
22
Figure 24
g231389
Werbung
Inhaltsverzeichnis
