Therapy Grips For Upper Torso Trainer; Safety Handle Adapters; Adjusting The Position Of The Control Pad - MEDICA THERA-vital Gebrauchsanweisung

Therapy grips for upper torso
K
trainer
The therapy grips 14 offer a variety of holding
positions for the hands. The therapy grips
should only be used for upper torso training if
the patient is capable of gripping them suffi-
ciently well and securely.
The therapy grips 14 are easy to remove from
the spindle on the crank 15 . To do so, press
in the locating pin with your thumb and pull the
therapy grips 14 off the spindle. Repeat the
operation with the other second therapy
grips 14.
To refit the therapy grips 14 , press in the lo-
cating pin on the therapy grips 14 and care-
fully slide the therapy grip onto the spindle on
the crank 15 as far as the stop. Now release
the locating pin. The therapy grips 14 should
perceptibly snap into position.

Safety handle adapters

L
The safety handle adapters convert the upper
torso trainer into an upper section with safety
handle in a few simple operations.
Fitting the safety handle adapters
❑
Press in the locating pin on the therapy
grips 14 and pull the therapy grip off the
K
spindle .
❑
Press in the locating pin on the adapter
handle and slide it onto the spindle on the
L
crank .
❑
Release the locating pin and push the
safety handle adapters as far as the stop.
The locating pin should audibly snap into
position
The safety handle adapters are
not designed to support the full
weight of the body or for carrying
the exerciser.
T
Locking the cranks
❑
Turn the arrester knob 29 a quarter turn
and then let go of it.
❑
Turn the cranks to a horizontal position so
that the arrester knob 29 audibly engages.
It should now not be possible to turn the
cranks 15.
To unlock the cranks, pull the arrester knob
downwards, turn it a quarter turn and let it go.
45
Adjusting the position of the
J
control pad
The position of the control pad on the
THERA-vital upper torso trainer 13 can be ad-
justed to suit the size and sitting position of
the patient.
❑
Undo the screws 12 on both sides of the
upper torso trainer a small amount.
❑
Adjust the control pad to the desired posi-
tion and firmly retighten the screws 12 .
For transportation, the control pad can be
folded back/down completely.
❑
Completely unscrew the screws 12 on both
sides of the upper torso trainer.
❑
Fold the control pad fully back/down.
❑
Refit the screws 12 to fix the control pad in
position for transportation.