Installation And Commissioning; Transport And Storage - Siemens SIMATIC CFU DIQ Bedienungsanleitung

FM approval
Table 7-4 Factory Mutual Research (FM) Certification
Classification
Standards
Standards for communication connections
The components described satisfy the requirements of the following standards:
• IEC 61158
• IEC 61784
The following applies to communication with the automation system via PROFINET:
–
Compliance with IEC 61784 Ed.2:2007 CPF 3/5
Safety requirements and special requirements
The components described satisfy the requirements and criteria of the following standard:
IEC 61010-2-201:2017 (Second Edition) / EN 61010-2-201:2017
(Note: These standards were supplemented by IEC 61010-1:2010 (Third Edition) / EN 61010-1:2010)
7

Installation and commissioning

WARNING
Mechanical hazard
Before beginning the installation in the control cabinet:
Always ensure that the control cabinet is securely fixed to the ground.
8

Transport and storage

WARNING
Mechanical hazard
Control cabinets can weigh more than 500 kg and are not protected against the danger of tipping since they have to be
moved vertically. Tipping or falling over may result in serious injuries or death.
• Only qualified personnel are permitted to participate in transporting the control cabinet.
• Properly secure the control cabinet before every transport.
• Always maintain a safe distance from the control cabinet while it is being transported.
• Never position yourself under hoisted objects.
• Never hold on to the control cabinet during its transport.
• Never pass in front of a moving load.
24
NI, Class I, Div 2, Groups A, B, C and D
NI, Class I, Zone 2, Groups IIC
FM Class 3600
FM Class 3611
FM Class 3810
ANSI/UL 61010-1
ANSI/UL 121201
CAN/CSA C22.2 No. 0-10
CSA-C22.2 No. 213
CSA-C22.2 No. 61010-1
SIMATIC CFU DIQ
A5E52564315-AA, 01/2023