Bergstrom IRIS Benutzerhandbuch Seite 15

7
Alarm clock function.
a. Pressing once programmes the alarm, with LED 8 coming on. The alarm is activated after
30 minutes, beeping for around 1 minute.
b. Pressing a second time programmes the alarm to come on after 60 minutes, beeping for
around 1 minute.
c. Pressing a third time programmes the alarm to come on after 90 minutes, beeping for
around 1 minute.
d. Pressing a fourth time programmes the alarm to come on after 120 minutes, beeping for
around 1 minute.
e. Pressing a fifth time disables the alarm.
An activation sound (beep) is emitted every time button 7 is pressed.
8
LED 8 indicates that the alarm is connected.
9a 9b
and Used to select water pump operating time.
9a
Increases pump operating time, so the unit delivers more cooling power.
9b
Decreases pump operating time, so the unit delivers less cooling power.
10a 10b 10c
and LEDs indicating water pump activation time according to buttons
9b
being pressed.
10a
Indicates that the water pump will operate for 10 seconds (1 litre of water from the unit's
tank).
10b
Indicates that the water pump will operate for 20 seconds (2 litres of water from the unit's
tank).
10c
Indicates that the water pump will operate for 30 seconds (3 litres of water from the unit's
tank).
11a 11b
and Buttons to manually control air blower speed.
11a
Increases air blower speed.
11b
Decreases air blower speed.
12
LEDs indicating chosen air blower speed, from 0 to 8.
13
LED indicating that the water pump is operating.
When the LED flashes fast, it indicates that the water pump is operating.
When the LED flashes slowly, it indicates that the water pump is not operating.
USER'S HANDBOOK
9a
IRIS EN
and
TU ESPACIO DE VIDA CONFORTABLE
15