Inhaltsverzeichnis
Werbung
A P P L I A N C E D E S C R I P T I O N ( S E E I M AG E A )
V
Bean container
1
Cup tray
2
Portafilter holder
3
Brewing head
4
Steaming wand
5
Drip tray
6
Grinder unlock button
7
Water tank
8
Water filter cartridge
9
Accessories storage
q
Power button
w
CO N T R O L B U T TO N S ( S E E I M AG E B )
V
Programming button
d
Filter size selection button
f
Grind size selector
g
Filter size indicator
h
Single cup extraction button
j
Double cup extraction button
k
I N S TA L L AT I O N
V
1.
Place the appliance on a stable, flat, and heat and moisture resistant surface.
Place the bean container
2.
on the appliance. Rotate until the bean container locks in place.
1
Plug the power cable
3.
into a power outlet.
e
Press the power button
4.
to switch on the appliance.
w
The appliance is ready for use when the cup extraction buttons
B E F O R E F I R S T U S E ( WAT E R F I LT E R C A R T R I D G E )
V
Before first use, clean the appliance as described in the chapter Daily maintenance.
If you don't want to use a water filter, you can leave the appliance on default settings. You can skip
4
the following steps in this chapter.
To place and configurate the water filter:
1.
Hold the test strip
briefly in a glass of tap water.
t
2.
Read the measured water quality on the test strip t.
3.
Rotate the selector at the bottom of the water filter cartridge
Position A
For use with soft water.
Position B
For use with medium hard water.
Position C
For use with hard water.
Hold the water filter cartridge
4.
in a container with water.
9
Gently squeeze the water filter cartridge
5.
Insert the water filter cartridge
into the bracket in the water tank
6.
9
downwards.
7.
Fill the water tank
with water up to the MAX marking.
8
42
Power cable
e
Milk jug
r
Test strip
t
Cleaning brush
y
Cleaning tool
u
Rubber insert for cleaning
i
Tamper
o
Double cup filter
p
Single cup filter
a
Portafilter
s
Steaming function button
l
Steaming knob
z
Display
x
Grind time knob
c
Portafilter button
v
Manometer
b
constantly light up white.
j k
to the optimal position.
9
to remove air bubbles from the filter.
9
with the selector facing
8
Press the programming button
8.
to enter the settings menu.
d
Press the steaming function button
9.
to enter the filter settings.
l
10. Press the single cup extraction button
j
11. Place a container (min. 500 ml) underneath the brewing head 4.
12. Press the programming button
to exit the settings menu. The rinsing process starts
d
automatically.
M A K I N G A N E S P R E S S O
V
To make an espresso with freshly ground coffee:
1.
Choose if you want to make one or two espressos.
Place empty cups on the cup tray
2.
to preheat the cups.
2
3.
Check if the water level in the water tank is in between the MIN and MAX indicator.
4.
If not, fill the water tank up to the MAX indicator.
Refresh the water at least once a day.
4
Fill the bean container
5.
with whole coffee beans (max 250 g).
1
Close the bean container
6.
with the lid.
1
7.
Make sure the hopper gate at the back of the bean container
8.
Place the corresponding cup filter
in the portafilter s.
p a
When the appliance isn't used recently, we recommend rinsing the appliance and the portafilter
4
(chapter Daily maintenance).
9.
Press the filter size selection button
to switch to the corresponding filter size.
f
10. If needed, adjust the grind size with the grind size selector g. Start with grind setting 12 and then
experience to find your personal favourite.
11. Place the portafilter
into the portafilter holder 3.
s
12. Rotate the grind time knob
to adjust the grinding time. The grind time is shown on the display
c
x.
The maximum grind time is 30 seconds. To save the grinding time for the selected filter size, press
4
and hold the filter size button. The filter size button blinks and the appliance beeps twice when the
setting is saved.
13. Press the grind time knob
or the portafilter button
c
display shows the remaining grind time.
If you need to stop the process before it is finished, press the grind time knob or portafilter button
4
again.
If you need to resume the grinding process, press the grind time knob or portafilter button again
4
within 20 seconds.
To grind without using the grind time presets, you can also press and hold the grind time knob or
4
the portafilter button. The grinder starts grinding and stops when the grind time knob is released.
14. Shake and pull out the portafilter
of the portafilter holder 3.
s
15. Gently tap the portafilter
against the counter to spread out the coffee ground.
s
16. Tamp the coffee ground with the tamper o.
Do not overfill the portafilter. The coffee ground should not make contact
6
with the brewing head when placed to ensure a proper seal.
17. Remove any coffee ground from the edge of the portafilter s.
18. Pull the steaming wand
to the side.
5
to set the filter setting to YES.
is open.
1
to start the grinding process. The
v
43
Werbung
Inhaltsverzeichnis
