NEC MultiSync LCD1510+ Bedienungsanleitung Seite 51

Installation
Screen Rotation
Before rotating, the screen must be raised to the highest level to avoid
knocking the screen on the desk or pinching your fingers.
To raise the screen, place one hand under bottom of screen (Figure RL.1),
lift up and simultaneously push the button on the bottom back of the
stand (Figure RL.2).
To rotate screen, place hands on each side of the monitor screen and
turn clockwise from Landscape to Portrait or counter-clockwise from
Portrait to Landscape (Figure R.1).
To toggle the orientation of the OSM menu between Landscape and
Portrait modes, press the RESET button while OSM menu is off.
Tilt and Swivel
Grasp both sides of the monitor screen with your hands and adjust the
tilt and swivel as desired (Figure TS.1).
Figure CM.1
Figure CM.3
Cable Cover
Lift up then remove
back cover
Push in and slide down
Leave sufficient
length of cable
Figure CM.2
E - 13